Scope of supply :

• 19inch 1U 24-port angled, metal patch panel, empty, integrated cable tie shelf
• 24 Cat.6A ISO connection modules, RJ45/u incl. dust covers
• 19" mounting kit
• Labeling kit
• Cable ties
• Installation instructions

Standardisation : IEC 60603-7-41: Electrical Characteristics of the Telecommunication Outlets; ISO/IEC 11801 ed. 2.2: June 2011; EN 50173-1: May 2011;
Fastening (inch) : 19inch
Height Units (U) : 1
Rack mounting version : Patch Panel
Capacity (ports) : 24
Number of connectors (A) : 24
Connector type (A) : RJ45
Category connector (A) : Cat.6A ISO
Shielding - connector (A) : No
Protection class (IP) connector (A) : 20
Holder for connector / module : Snap-In Frame
Color : steel: blue, chromatized / front: gray (NCS 2502-B)
Assembly : fully populated
Dimensions : 43.2 x 482.6 x 245.3 mm
Material : steel: DC01 (1.0330), 1.5 mm

Populated with 24 unshielded RJ45 connection modules of Cat.6A ISO, for the setting up of transmission channels of Class EA with up to 4 plugged connections acc. to ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011 (DIN EN 50173-1) and Class F on 2 pairs, complies with Cat.6A requirements of the standards ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011, as well as ANSI/TIA/EIA 568-C.2, re-embedded tested in acc. with IEC 60603-7-41 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.
Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 500 MHz and 100 m.
Tested in line with R&M s manufacturing control, performing 100% inspection.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection with automatic wire cutting of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. X-Separator for individual pair shielding. Parallel pair termination without crossover in acc. with EIA/TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with >20 insertion cycles, contact resistance <5 mOhm, dielectric strength >1000 Veff. PoE/PoEplus capable, 90° wire orientation without bending cable. With integral cable strain relief, including dust cover.
Connection module Cat.6A ISO, unshielded, with dust cover, snap-in frame, cable tie and installation instructions