Slobodnostojeći serverski rek dimenzija 800x1000 (ŠxD), visine 42HU, sa prednjim i zadnjim perforiranim vratma, nosivost 1200kg

Štampa PDF

 

 

linija

 

Proizvođač:  TRITON 

Samostojeći ormani širine 800mm 

Kataloška oznaka: RTA-42-L81-CAX-A1-DAA

 

slika

Cena: zvati 

Jed.mere: kom       PDV: 20 % 

Garancija: 2 godine 

 

 

Welded skeleton with demountable side panels and back panel,

IP 20, loading capacity 1200/1500 kg

Strengthened skeleton

Cold-rolled steel 1,3 mm.

Sliding rail fixed at four points

Cold-rolled steel 2,5 mm.

Tritón handle

By replacing the plastic inlet (not supplied), a classic or half-cylindric lock can be selected. Patent: PUV 2013-27443.

Wider body rails

Wider rails in the body of a cabinet are intended for an additional installation of 19“ power management panels, which afterwards do not occupy space within the cabinet. Thanks to this smart solution of gripping, it does not block the sliding servers even for the 600 mm cabinet type. In addition to this solution, the A5 version (at the end of the cabinet code) is characterized by break-out blanking panels for possible cable input and management in between neighbouring cabinets.

 

  • 19" free-standing cabinet with IP20 protection.
  • Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
  • Cabinet construction:
       – Welded steel frame with removable side panels.
       – Single or double doors in all metal versions, perforated (80% and 86% air permeability) or glazed with safety tempered glass 4 mm. They can be on the front or back of the cabinet
       – Preparation for installation of vertical cable management panels and power distribution units, including mounting brackets, to the frame of the cabinet.
       – Preparation for joining the cabinets together.
       – A5 and A7 version have a breakout cable entries in the frame for the cabling between cabinets.
  • The maximum recommended load of the cabinet is 1200 kg, maximum load of the door is 20 kg.
  • The racks are designed for installation of data and telecommunication equipment and distribution systems
  • The frame of the cabinet and all removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
  • There is one M8 screw placed on the bottom part of the cabinet to connect the earthing wire.
  • Can be mounted on castors and levelling feet (models A1 and A5).
  • Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.


 

 

 

 

 

linija

Početak strane