Technical Data

Cable family code	OT1EL
Cable type	Central loose tube cable
Cable version	n.a.
Cable application	outdoor use
DoP number	D9905
Fiber type	OM3
Fiber count	12
Fiber color coding	1.-12.: red, green, blue, yellow, white, grey, brown, violet, turquoise, black, orange, pink
Fiber count per tube	12
Loose tube count	1
Loose tube diameter	2.8 mm
Armor	Rodent protection
Outer sheath thickness	1 mm
Outer sheath material	UV stable LDPE
Outer sheath color	black
Sheath marking	Ink-Jet, white
Cable outer diameter	5.8 mm
Cable weight	29.0 kg/km / 19 lbs/1000ft
DIN / VDE 0888 code	A-DQ(ZN)2Y
CPR test method	EN 50575, EN 13501-6
Standard put-up length on drum	2100 m ± 5%
CPR classification	Fca

Mechanical Data

In-service tensile strength	300 N
In-service tensile strength acceptance criteria	Δα ≤ 0,05 dB
In-service tensile strength test method	IEC 60794-1-21:E1
Installation tensile strength	1000 N
Installation tensile strength acceptance criteria	Δα ≤ 0,05 dB after test
Installation tensile strength test method	IEC 60794-1-21:E1
Crush resistance long term	1000 N/100mm
Long-term crush resistance acceptance criteria	Δα ≤ 0,05 dB prior release, no damage
Long-term crush resistance test method	IEC 60794-1-21:E3A
Short-term crush resistance	2000 N/100mm
Short-term crush resistance acceptance criteria	Δα ≤ 0,05 dB after release, no damage
Short-term crush resistance test method	IEC 60794-1-21:E3A
Impact resistance	10 Nm, 3 impacts, d=20 mm, R=300 mm
Impact resistance acceptance criteria	Δα ≤ 0,05 dB after test, no damage
Impact resistance test method	IEC 60794-1-21:E6
Torsion	L = 1 m, rotation angle ±180°, 10 cycles
Torsion acceptance criteria	no damage
Torsion test method	IEC 60794-1-21:E7
Repeated bending	R=20 x cable diameter, 25 cycles
Repeated bending acceptance criteria	Δα ≤ 0,05 dB after test, no damage
Repeated bending test method	IEC 60794-1-21:E6
Cable bend	R=20 x cable diameter, 4 turns, 3 cycles
Cable bend acceptance criteria	Δα ≤ 0,05 dB after test, no damage
Cable bend test method	IEC 60794-1-21:E11A
Minimum bend radius in service	90 mm
Minimum bend radius during installation	130 mm

Environmental Characteristics

Temperature cycling	-20 °C +70 °C / -4 °F +158 °F
Temperature cycling acceptance criteria	Δα ≤ 0,15 dB, reversible
Temperature cycling test method	IEC 60794-1-22:F1
Reversible temperature cycling	-25 °C +70 °C / -13 °F +158 °F
Reversible temperature cycling test method	IEC 60794-1-22:F1
Operation temperature	-20 °C to +70 °C / -4 °F to +158 °F
Storage / Transport temperature	-25 °C to +70 °C / -13 °F to +158 °F
Thermal load	0.86 MJ/m
2015 / 863 / EU - RoHS 3	Pass